主页 >> 产品 >> TEK-DSA70804
 
其它可用的配置。
请打电话找本公司经验丰富的销售人员。
 
Tektronix DSA70804
8GHz 4CH Digital Serial Analyzer
 
浏览
查看数据表
部件号包括的选项
选择需报价的项目
租用/租赁 买二手设备
TEK-DSA70804/10XL/P5/100M per CH memory/DJA, DSPT,HT3,PCE Bundle
产品目录品名

Tektronix DSA70804

 TEK-DSA70804 8GHz 4CH Digital Serial Analyzer

The DSA70000 Series is a real-time digital serial analyzer that is optimized
for verifying, characterizing, debugging and testing sophisticated high-speed
serial designs. The DSA70000 series competes against the LeCroy SDA series.

The  TEK-DSA70804 comes bundled with the following application software:
JA3 - Advanced Jitter Analysis.
RTE - Real Time Eye for Serial Testing
PTH - Serial Protocol Trigger and Decode
MTH - Serial Communications Mask Testing
ASM - Advanced Event Search and Mark - added Sept 2007

Specifications:
Bandwidth: 8GHz
Sample Rate: 25GS/s on all 4 channels
Standard Memory: 20M per channel on all 4 channels (Option 2XL)
Maximum Memory: 100M per channel on all 4 channels (Option 10XL)
Waveform Capture Rate: > 250,000 wfms/second on all 4 channels
Serial Pattern Triggering up to 3.125 Gb/s with 8 b/10 b Protocol Triggering
for Isolation of Pattern-dependent Effects

Standard features include 12.1 in XGA 1024 x 768 display, Windows XP Pro.

Memory Upgrades:

TEK-DPO7UP/XL010 Memory Upgrade 20Ms to 100Ms per ch
TEK-DPO7UP/XL510 Memory Upgrade 50Ms to 100Ms per ch

The  TEK-DSA70804 uses the current TekConnect probes.
(4) TekConnect to 29.2 mm adapters ( TEK-TCA-292MM) and (1) TekConnect to BNC
adapter ( TEK-TCA-BNC) are standard accessories with each scope.

Software Options:
PCE - PCI Express Compliance Module
IBA - InfiniBand Compliance Module
FBD - FB-DIMM Compliance Module
SST - Serial ATA, SAS Compliance Module
HT3 - HDMI Compliance Testing
ET3 - Ethernet Compliance Testing
USB - USB Compliance Testing
PWR - Power Measurement and Analysis
VNM - CAN/LIN Timing and Protocol Decode
DJA - Jitter Eye Advanced Tools (via DJUP Upgrade)
Input/Output Ports
Front Panel
Aux Trigger Input - See trigger specifications.
Recovered Clock - SMA connector, =/<1.25 Gb/s,
Output swing =/>130 mVpk-pk into 50 ohm at 1.25 Gb/s.
Requires Opt. PTH or Opt. MTH to enable on DPO70000, standard on DSA70000.
Recovered Data - SMA connector, =/<1.25 Gb/s,
Output swing of 1010 repeating pattern 200 mV into 50 ? at 1.25 Gb/s. Requires
Opt. PTH or Opt. MTH to enable on DPO70000, standard on DSA70000.
DC Probe Calibration Output - BNC connector,
10 V DC for DC probe calibration. (Signal available
only during probe calibration.)
Fast Edge Output - SMA connector provides fast edge signal. 1 kHz 20%; 810 mV
(base to top) 20% into =/>10 kohm load; 440 mV 20% into a 50 ohm load.
AUX Trigger Output - BNC connector, provides a TTL-compatible, polarity
switchable pulse when the oscilloscope triggers.
USB2.0 Port - One in front, four on back. Allows connection or disconnection
of
USB keyboard, mouse or storage device while oscilloscope is on.

Rear Panel
External Time Base Reference In - BNC connector; allows time base system to
phase lock to external 10/100 MHz reference.
Time Base Reference Out - BNC connector;
provides TTL-compatible output of internal 10 MHz reference oscillator.
AUX Trigger Output - BNC connector, 0 to 3 V; default output is A-Event
Trigger
low true.
Parallel Port - IEEE 1284, DB-25 connector.
Audio Ports - Miniature phone jacks for stereo microphone input and stereo
line
output.
USB2.0 Ports - Four in back. Allow connection or disconnection of USB
keyboard,
mouse or storage device while oscilloscope power is on.
Keyboard Port - PS/2 compatible. Mouse Port - PS/2 compatible.
LAN Port - RJ-45 connector, supports 10Base-T, 100Base-T and 1000Base-T.
Serial Port - DB-9 COM1 port.
Windows Video Port - 15-pin D-sub connector on the rear panel; connects a
second monitor to use dual-monitor display mode allowing analysis results and
plots to be viewed along with the oscilloscope display. Video is DDC2B
compliant.
GPIB Port - IEEE 488.2 standard.
Scope XGA Video Port - 15-pin D-sub connector on the rear panel, video is IBM
XGA compatible. Connects to show the oscilloscope display, including live
waveforms on an external monitor or projector. The primary Windows desktop can
also be displayed on an external monitor using this port.
TekLink - Proprietary interface for connecting multiple Tektronix instruments.
Power - 100 to 240 VRMS, 10%, 50/60 Hz;
115 VRMS 10%, 400 Hz; CAT II, <1100 VA typical.

ER's P1 Bundle consists of the following options:

/DJA - Jitter Eye Adv Tools (via DJUP Upgrade)
/ET3 - Ethernet SW
/PCE - PCI Express SW
/SST - SAS & SATA Compliance
/USB - USB Compliance SW

ER's P2 Bundle consists of the following options:

/DDRA - Upgrade to DDR Technology Analysis Package
/DJA - Jitter Eye Adv Tools (via DJUP Upgrade)
/ET3 - Ethernet SW SAS Compliance Module
/SST - SAS & SATA Compliance
/USB - USB Compliance SW

ER's P3 Bundle consists of the following options:

/DDRA - Upgrade to DDR Technology Analysis Package
/DJA - Jitter Eye Adv Tools (via DJUP Upgrade)
/ET3 - Ethernet SW
/PCE - PCI Express SW
/SST - SAS & SATA Compliance
/USB - USB Compliance SW

ER's P4 Bundle consists of the following options:

/DDRA - Upgrade to DDR Technology Analysis Package
/DJA - Jitter Eye Adv Tools (via DJUP Upgrade)
/PCE - PCI Express SW
/SST - SAS & SATA Compliance
/USB - USB Compliance SW

ER's P5 Bundle consists of the following options:

/DJA Jitter Eye Adv Tools (via DJUP Upgrade)
/DSPT DisplayPort Transmitter Compliance Test Software
/HT3 HDMI Compliance Test Software
/PCE PCI Express Software

ER's P6 Bundle consists of the following options:
/DVI - DVI Compliance SW
/ET3 - Ethernet SW
/PCE - PCI Express SW
/USB - USB Compliance SW

ER's P7 Bundle consists of the following options:
/DVI - DVI Compliance SW
/ET3 - Ethernet SW
/PCE - PCI Express SW
/USB - USB Compliance SW
/DJA - Jittter and Eye Analysis Tools Advanced

ER's P8 Bundle consists of the following options:
/10XL - 100M per CH memory
/DJA - Jitter Eye Adv Tools
/ET3 - Ethernet SW
/HT3 - HDMI Compliance Test SW
/PCE - PCI Express SW
/SST - SAS & SATA Compliance
/USB - USB Compliance SW

ER's P9 Bundle consists of the following options:
/PCE - PCI Express SW
/SST - SAS & SATA Compliance
/SVEH - SignalVu Essentials
/SVM - GP Modulation Analysis
/USB - USB Compliance SW
装运重量 
19.29 " 17.75 " 11.74 " 75 lb  
    
N/A 目前不出售的二手设备
需要配置方面的协助吗?请打电话找本公司经验丰富的销售人员。