主页 >> 产品 >> KT-N9952A
 
其它可用的配置。
请打电话找本公司经验丰富的销售人员。
 
Keysight Technologies (前 Agilent) N9952A
300kHz-50GHz FieldFox Handheld Microwave Combo Analyzer
 
浏览
查看数据表
部件号包括的选项
选择需报价的项目
租用/租赁 买二手设备
KT-N9952A/10/210/211/233/235/VNA Time Domain/VNA transmission/reflect./VNA full 2-port S-params/Spectrum Analyzer/Preamplifier
KT-N9952A 
KT-N9952A/233/235/Spectrum Analyzer/Preamplifier
KT-N9952A/P3/30/208/233/235/238/302
产品目录品名

Keysight Technologies (前 Agilent) N9952A

300 kHz to 50 GHz FieldFox Handheld Microwave Combo Analyzer

Features:
Cable and Antenna Analyzer (standard):
Frequency range: 300 kHz to 50 GHz
Measurements:
Distance-to-fault (dB), Return loss, VSWR, distance-to-fault (VSWR),
cable loss(1-port), insertion loss(2-port),
distance-to-fault (linear or Rho)
Display range: Start, stop, center, span
Return loss, log magnitude -1000 to 1000 dB
Log magnitude resolution 0.01 dB

System Dynamic Range:
1, 2 Port 1 or port 2, high power, 300 Hz IF bandwidth, 100 point average,
Frequency Spec dB Typical
300 kHz to 1 MHz -- 70 (nominal)
1 to 10 MHz -- 100 (nominal)
10 MHz to 20 GHz 100 110
20 to 44 GHz 90 100
44 to 50 GHz 81 90

Network Analyzer (option 210):
Frequency range: 300 kHz to 50 GHz
Transmission/reflection: (S21, S11), mag and phase, one-port
and enhanced response calibration with option 201
Full two-port (S21, S11, S12, S22) with option 211 requires 210
Time domain analysis with option 10, requires option 210 and recommend 211

Network Analyzer (option 211):
Frequency range: 300 kHz to 50 GHz
Full 2-Port S-Parameters, magnitude and phase
All 4 S-Paramters: S11, S22, S12, S21

Spectrum Analyzer(option 233):
Frequency range: 9 kHz to 50 GHz usable to 5kHz
DANL (displayed average noise level):
Preamp off: Spec:(23 +/- 5 degC) Typ:(23 +/- 5 degC)
9 kHz to 2 MHz -91 -118
2.8 to 4.5 GHz -137 -143
4.5 to 7 GHz -134 -140
7 to 13 GHz -134 -141
13 to 22 GHz -132 -140
22 to 35 GHz -130 -137
35 to 40 GHz -122 -132
40 to 46 GHz -119 -126
46 to 50 GHz -117 -124
Preamp on: Spec:(23 +/- 5 degC) Typ:(23 +/- 5 degC)
9 kHz to 2 MHz -94 -131
2 MHz to 2.1 GHz -153 -159
2.1 to 2.8 GHz -151 -157
2.8 to 4.5 GHz -153 -158
4.5 to 7 GHz -150 -156
7 to 13 GHz -146 -152
13 to 22 GHz -142 -149
22 to 35 GHz -141 -147
35 to 40 GHz -136 -144
40 to 46 GHz -131 -138
46 to 50 GHz -126 -135


Vector voltmeter (VVM) (Option 308)
VVM: 30 kHz to 4 GHz, compare phase and electrical length
IF bandwidth - 10 Hz to 100 kHz
Output power - Low or high

External USB power sensor support (Option 302)
Requires U2000 Series USB average power sensors, and
allows the user to make absolute power measurements

Built-in GPS receiver (Option 307) may require an antenna
GPS receiver The internal GPS receiver can be used as a frequency
reference
Modes Off, internal, external
Sync clock On, off
Functionality Geo-location:
Latitude, longitude, altitude, time, sync time/date
Connector for antenna SMA (f), 3.3 V


General Information :

Test port connector 2.4 mm (m) NMD 50 ohm
Data storage:
Internal Internal Minimum: 4 GB
Minimum states and traces: 1000
External Supports USB 2.0 compatible memory devices and SD/SDHC cards
Data types Trace, trace+state, picture (png), data (csv), S2P

6.5 translective color VGA-LED backlit
Mini USB (1 port) Hi-speed USB 2.0, USBTMC Support
USB-A (2 ports) Hi-speed USB 2.0
LAN 100Base-T External RJ45 connector
SCPI over LAN using sockets and VX11 (LAN IEEE488); HTTP

Options:
10 VNA Time Domain (requires 210, option 211 recommended)
30 Remote control capability
208 USB power sensor measurements versus frequency (requires 302)
210 VNA Transmission / Reflection Measurements
211 VNA Full 2-port S-parameters (requires 210)
212 VNA 1-port mixed-mode S-parameters (requires 210 and 211)
215 TDR Cable Measurements
233 Spectrum Analyzer
235 Preamplifier (requires 233)
302 USB power sensor support (requires external USB sensor)
305 Cable and antenna analyzer
307 GPS receiver
308 Vector voltmeter
309 DC bias variable-voltage source
310 Built-in power meter
330 Pulse measurements

Recommended Calibration Kits:
2.4 mm:--------------------------------------------------------------
KT-85056A 2.4mm Standard calibration kit
 KT-85056D 2.4mm Economy calibration kit
 KT-85133F 2.4mm Flexible test port cable set 24.5 inches each
 GORE-85133F 2.4mm Flexible test port cable set 24.5 inches each
 KT-85134F Flexible cable set for 3.5mm-2.4mm (one male, one female)
 GORE-85134F Flexible cable set for 3.5mm-2.4mm (one male, one female)
 KT-N4693A/00F 10MHz-50GHz ECal module female-female
 KT-N4693A/M0F 10MHz-50GHz ECal module male-female

Optional FieldFox accessories:
N9910X-870 Extra battery
N9910X-872 External battery charger
N9910X-873 AC/DC adapter
N9910X-875 DC car charger and adapter
N9910X-880 Extra soft carrying case with backpack and shoulder strap
N9910X-881 Hard transit case


Option P1 is a bundle of:
210 VNA transmission/reflection measurements
211 VNA full 2-port S-parameters
215 TDR Cable Measurements
233 Spectrum Analyzer
235 Preamplifier
307 GPS Reciever
309 DC Bias-Variable DC Source
350 Real time Spectrum analyzer








装运重量 
24 " 16 " 12 " 31 lb  
    
N/A 目前不出售的二手设备
需要配置方面的协助吗?请打电话找本公司经验丰富的销售人员。