Keysight Technologies (å‰ Agilent) N9030A-508 3 Hz to 8.4 GHz PXA Signal Analyzer Product Highlights: ______________________________________________
PXA signal analyzer is the highest-performance member of the Keysight X-Series signal analyzers and is the evolutionary replacement for your current performance signal analyzer. It provides frequency coverage up to 26.5 GHz and ensures present and future flexibility through optional measurement capabilities and hardware expandability.
The PXAs advanced performance, flexibility, capability and expandability enable you to address demanding applications in aerospace, defense, commercial communications and more. In addition, the PXA includes extensive remote language compatibility features that make it easier to replace existing Keysight or HP performance spectrum analyzers.
General Purpose/Other Applications:_______________________________ EMC/EMI, Flexible Digital,Modulation Analysis MATLAB, Noise Figure, Phase Noise, Pulse, Code Compatibility Cellular Applications and Wireless connectivity with 89601B software. Code compatible with PSA and other legacy platforms (8566/68, 856x)
Expandability: ___________________________________________________
* Seven expansion slots * A removable CPU motherboard * Firmware-based measurement applications * An open Windows operating system that lets you run software applications inside the analyzer * Mechanical attenuator 2 dB steps, 0 to 70 dB * Optional Electronic attenuator with option EA3;1dB steps, 0 to 24dB
Specifications:___________________________________________________
Resolution Bandwidth (RBW):1Hz to 3MHz in (10% steps), 4, 5, 6, 8 MHz; EMI bandwidths (CISPR compliant): 200Hz, 9kHz, 120kHz, 1MHz (Opt EMC required); EMI bandwidths (MIL STD 461E compliant: 10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz (Opt EMC required);
DANL: -152dBm in 10Hz RBW, up to 3.6GHz -151dBm in 10Hz RBW, 3.6GHz to 8.4GHz, -155dBm with option LNP enabled, -149dBm in 10Hz RBW, 8.4GHz to 13.6GHz, -155dBm with option LNP enabled -138dBm in 10Hz RBW, upto 26.5GHz,-150dBm with option LNP enabled Preamp on: -165dBm in 10Hz RBW, up to 3.6GHz -163dBm in 10Hz RBW, 3.6GHz-13.6GHz -156dBm in 10Hz RBW, 13.6GHz-26.5GHz
Analysis BW: 10MHz Standard, 25MHz with option B25 40MHz with option B40, option MPB required above 3.6GHz 160MHz with option B1X, option MPB required above 3.6GHz
Third Order Intercept (TOI): +21dBm to 3.6GHz, +15dBm to 13.6GHz, +11dBm to 26.5GHz Phase Noise (1GHz Center Frequency): -128dBc at 10kHz offset RF input connector: type N (f) 50ohm
Interfaces:_______________________________________________________
LXI class C compliant, SCPI and IVI-COM USB 2.0, GPIB, and LAN (1000BaseT) Probe power: +15 Vdc, +-7% at 150mA max nominal; -12.6 Vdc, 10% at 150mA max nominal;
Display Resolution: 1024 x 768 XGA Power requirements: 100 to 120 V, 50/60/400 Hz 220 to 240 V, 50/60 Hz Data storage : Internal: 160 GB nominal (Removable hard disk drive) 32 GB nominal with Option SSD (Removable solid state drive) External: Supports USB 2.0 compatible memory devices
Option HDD has been replaced by SSD and is standard on all units.
Internal Operating System:__________________________________________ WXP Windows XP Embedded Operating System W7X Windows 7 Embedded Operating System
Real time options require B1X RT1 Real-time spectrum analyzer up to 85MHz analysis bandwidth RT2 Real-time spectrum analyzer up to 160MHz analysis bandwidth RT2 is export restricted
See also KT-E4440A.
Option CRP: Programmable IR output,10 to 75 MHz, in 0.5 MHz increments) similar to option H70 on PSA.
For USB Mouse use DELL-310-4073-MOUSE-USB/B For USB Keyboard use DELL-310-3157-KB/USB/B For USB DVR use PLEX-PX-716UF-DVDRW-COMBO
For rack mount 1CP See KT-5063-9222 or KT-1CP005A
For rack mount 1CM See KT-5063-9215 or KT-1CM013A.
For 1CN rack mount See KT-5063-9228 or KT-1CN003A
See also KT-E4440A.
Option CRP: Programmable IR output,10 to 75 MHz, in 0.5 MHz increments) similar to option H70 on PSA.
For USB Mouse use DELL-310-4073-MOUSE-USB/B For USB Keyboard use DELL-310-3157-KB/USB/B For USB DVR use PLEX-PX-716UF-DVDRW-COMBO
For rack mount 1CP See KT-5063-9222 or KT-1CP005A
For rack mount 1CM See KT-5063-9215 or KT-1CM013A.
For 1CN rack mount See KT-5063-9228 or KT-1CN003A
Option HDD has been replaced by SSD and is standard on all units. Additional SSD units can be ordered as KT-N9030AK/SSD. EDP Enhanced Display Package, provide Spectrogram, Trace Zoom and Zone Span EXM External mixing is used with new series mixers M1970V/W, for use with 11970 series mixers N9029AE13 diplexer is required.
Software descriptions:____________________________________________ Available as Fixed or Transportable Licenses:
N9051A N9051A-2FP Pulse measurement software N9051A3 N9051A-3FP Phase & Frequency Measurements N9051A4 N9051A-4FP Extended Analysis & Statistics N9061A/1FP Remote language compatibility, 8566/68 N9061A/2FP Remote language compatibility, 856xE/EC N9062A/2FP R&S SCPI language compatibility N9063A/2xP Analog demodulation measurement application N9064A/1xP Vector signal analysis measurement application N9064A/2xP Flexible digital modulation analysis, requires 1xP N9064A/3xP WLAN (802.11a/b/g) modulation analysis, requires 1xP N9068A/2xP Phase noise measurement application N9069A/1xP Noise figure measurement application requires Preamp to meet specifications; works with N400XA series and 346 series sources
N9071A/2xP GSM/EDGE Measurement application N9071A/3xP EDGE Evolution measurement N9071A/XxP Single Acquisition Combined GSM/EDGE N9072A/2xP cdma2000 Measurement application N9073A/1xP W-CDMA Measurement application N9073A/2xP HSDPA/HSUPA measurement application, requires N9073A/1xP N9073A/3xP HSPA+ Measurement Application, requires N7073A/1xP N9074A/XxP Single acquisition combined fixed WiMAX meas. application N9075A/2xP WiMAX 802.16-OFDMA application N9076A/1xP 1xEV-DO Measurement application N9077A/XxP Wireless LAN Measurement application N9079A/1xP TD-SCDMA Measurement application N9079A/2xP HSDPA/8PSK Measurement application, requires N9079A/1xP N9080A/1xP LTE-FDD Measurement application N9082A/1xP LTE-TDD Measurement application Electro Rent defined bundles:______________________________________ Option BW1 is a bundle of: B1X 140MHz Analysis bandwidth LNP Low noise path MPB Microwave preselector bypass
Option HW2 is a bundle of: ALV Auxiliary log video output EA3 3.6GHz Electronic attenuator EMC Basic EMC Functionality ERC External Reference Coupling P08 8.4GHz Preamplifier YAV Y-axis video ouptut
Option HW3 is a bundle of: N9069A Noise figure measurement application P08 8.4GHz Preamplifier
Option HW4 is a bundle of: B25 25MHz Analysis bandwidth LNP Low noise path P08 8.4GHz Preamplifier
Option RTSA is a bundle of: B1X 160MHz Analysis Bandwidth LNP Low noise path MPB Microwave preselector bypass RT2 Real-time spectrum analyzer up to 160MHz analysis bandwidth
Option N2 is a bundle of: LNP Low noise path P08 8GHz Preamplifier
Option N3 is a bundle of: EMC Basic EMC capability LNP Low noise path P08 8GHz Preamplifier
Option P1 is a bundle of options: ALV Auxiliary log video output EA3 3.6GHz Electronic attenuator EMC Basic EMC Functionality ERC External Reference Coupling LNP Low noise path MPB Microwave preselector bypass P08 8.4GHz Preamplifier YAV Y-axis video output
Option P2 is a bundle of options: ALV Auxiliary log video output EMC Basic EMC Functionality ERC External Reference Coupling YAV Y-axis video output
Option Z1 includes: B1X 160MHz Analysis bandwidth LNP Low noise path MPB Microwave preselector bys N9068A N9068A-2FP Phase noise N9069A Noise figure measurement P08 8.4GHz Preamplifier
|